Ritetemp 5051 User Manual download pdf (Page 6)

RiteTemp Internal Document

Page 6

Removing Side Tanks

Make sure unit is unplugged from wall. Remove

the side water tanks by lifting up and then

away from the cooler. Take tanks and faucet

attachment hose to sink or other water source.

Stand tanks upside down on stable surface.

Reconnecting tanks to main unit

Remove filler hose from faucet

and take water tank back to

main unit. Replace each side

tank. Making sure that the

water nozzle sets directly into

the cooler base and the top

lip aligns securely with the

notches at the top of the unit.

(*Please note it may take up to 5 minutes for the water to

transfer to the main tank on the first fill)

Fill Tanks

With the water turned off, connect the

white funnel end of the attachment hose to faucet.

Remove the tank’s cap and insert the clear tube. Fill

tank with cold water then replace the cap making

sure it is seated correctly and is tight to avoid any

leakage. Repeat process for other tank.

Filling the Cooler

Page 11

RiteTemp

End of Season Maintenance and Storage continued

Getting Cooler Ready for Storage continued

 Next put base unit on its side wheels down and allow wa-

ter to drain out. Leave base

unit in this position until it is

completely dried out.

 This is a good time to clean out the drip

tub. This can be done by using a paper

clip and inserting it in the holes to make

sure they are not clogged.

 Once all of the pieces are dried out you

can reassemble the unit.

 Store unit indoor in a dry environment till

needed.

1 2 3 4 5 6 7 8

No comments

Ritetemp 5051 User Manual Page 6