Install guide 8035C1-402-051Customer Support: 888-515-2585 or Visit our website www.ritetemp-thermostats.comRESETMENUPROGRESETMENUPROGENGLISH
Install guide 8035C1 LocationCautionTools To avoid electrical shock and to prevent damage to the furnace, air conditioner, and thermostat, disconnect
3 Mount the 8035Cï Separate front from back of unit. Press up on the catch on bottom of thermostat and swing the body away from the base, lift up to r
PG 5AAAAPlease be aware of the following power options.1) The 8035C can run on batteries only. (2AA Alkaline) The batteries will last well over
PG 8PG 7Please refer back to these guidelines for safe and secure wire connections.ï Take care not to damage the labels for each wire in handling.ï St
RESETMENUPROGRESETMENUPROG7 Wire Connections contWhen you have finished connecting the wires, close cover and attach control unit to wall unit. Hook t
PG 11PG 12STEP 1 - Connect the R (or RH) wire to the RH terminal on the thermostat. This connects the Heater Power to the thermostat.STEP 2 - Connect
PG 14PG 13From Furnaceand AC unitGWYRHRCCRGYWCRHorFrom Furnaceand AC unitSTEP 1 - Connect the Y wire to the Y terminal on the thermostat. This connect
PG 16PG 15STEP 1 - Connect the G wire to the G terminal on the thermostat. This connects the Fan.STEP 2 - Add a jumper wire between W and Y.STEP 3 - C
Comments to this Manuals